Nigara Santoku SG2 Tsuchime Wa 180mm (7.1″) Fashion

Description

Nigara Santoku SG2 Tsuchime Wa 180mm (7.1″)

Nigara Santoku SG2 Tsuchime Wa 180mm is a multi-purpose Japanese kitchen knife, suitable for preparing meat, fish and vegetables. Its SG2 powder steel core insures long-lasting sharpness with little to no maintenance, as the steel resists corrosion very well.

The knife has all the features of a traditional Japanese santoku blade: a wide blade, a flat belly, and a spine that curves at a 60-degree angle towards the tip (making it resemble a sheep’s foot). The geometry of the blade (hollow grind), combined with the unique hexagonal hammer blows, prevents ingredients from sticking to the blade during chopping, making for faster and more precise work.

BLADE SHAPE:
The Santoku knife, originating from Japan, is a versatile and multipurpose kitchen tool commonly found in Japanese households. It excels at various cutting and chopping tasks on the cutting board.

The name “Santoku” derives from the Japanese word “San,” meaning “three,” representing the knife’s three virtues. It effortlessly handles three key ingredients: meat, fish, and vegetables. It is equally adept at slicing, chopping, and mincing, making it a versatile companion in the kitchen.

The Santoku knife is divided into three distinct parts: the tip is designed for intricate work, allowing for precise cuts, the cutting edge serves general cutting purposes, accommodating a range of tasks, the heel of the knife is perfect for heavy-duty chopping.

With its rich heritage and versatile design, the Santoku knife is an indispensable tool for any kitchen, catering to a wide range of cutting needs with its three virtues.

*The length of the cutting edge is 165mm (heel to point), but with this knife the length is measured from the edge of the handle to the tip of the blade, amounting to 180mm.

STEEL:
SG2 steel is a powder steel, renowned for its hardness and subsequent edge retention—due to a high carbon (C) content of 1.5%. The steel is also high in chromium (Cr)—around 15%, which adds to corrosion resistance and Molybdenum (Mo) that improves the blade’s wear resistance. SG2 steel blades will be able to achieve a fine sharpness due to the fine microstructure of the steel and will keep it—without having to worry about maintenance and corrosion.

LAMINATION:
A high hardness of around 64 HRC means that the blade won’t be very tough, so the blade’s core was laminated using the san-mai method to improve its structural integrity and subsequent ability to withstand impacts and prevent chipping. San-mai translates to “three layers” in Japanese, referring to a blade that is composed of a primary, inner layer of harder steel (hagane) and of two secondary, outer layers of softer steel (jigane) that protect the prior.

GEOMETRY:
It has a double bevel (symmetrical) blade with convex (full hamaguri) grind. Hamaguri grind allows superior sharpness that requires delicate handling and helps to prevent food from sticking to the blade. Such a shape keeps a lot of metal behind the edge and makes for a stronger edge, yet it still allows a good degree of sharpness. The downside to a convex grind is that it is very hard to reproduce by anyone other than a very experienced sharpener.

BLADE FINISH:
The surface of the blade was treated with a special textured hammer, leaving complex geometric impressions on its upper part. The Japanese hexagon hammered finish on knives is a stunning technique that involves skillfully hammering the blade’s surface to create captivating hexagonal indentations.

The tsuchime surface helps to reduce friction and prevents food from sticking to the blade during cutting. The textured surface creates small air pockets which allow for smoother and more precise cutting.

HANDLE:
The Japanese handle (Wa) is made of teak wood with a buffalo horn ferrule. Suitable for both left and right-handed users. With the choice of the shape and the wood, the handle embodies a simple Japanese aesthetic.

BLACKSMITH:
Nigara Hamono has a 350-year history, making swords since the Edo period. Head blacksmith Tsuyoshi Yoshizawa, who works alongside his father Toshi Yoshizawa, is an eighth generation blacksmith with a passion for art and music as well as knives, and his famous Nigara Anmon design is the result of his love of Andy Warhol’s artwork. Nigara is easily one of the most special knife makers in Japan.